Have you ever had a chance to fly a quad copter? If not, you have no idea just how exciting it is to fly these machines with precision accuracy, using a remote controller. However, once you do attempt to fly one, you will encounter many problems in the beginning. This is because this type of an aerial machine is extremely sophisticated and it requires a good number of trial-and-error attempts to master the skill of handling it perfectly. Whether you have already tried your luck on flying one or you’ve yet to take your first one in air, this article will help you learn the basics of flying and refine your skills so that you can tremendously enjoy this pastime.
Here is a step-by-step guide to mastering the art of piloting to impress others or simply have a great time flying recreationally. First of all, you need to gain knowledge about various parts and components a quad copter is assembled with http://www.droneaddicts.net.
Mainly there are three parts of a quad copter at http://www.droneaddicts.net:
- Remote controller.
- Built-in Camera.
A remote controller or transmitter allows the pilot to control the quad copter and change its settings according to your skill level. This device needs batteries to operate. Propellers spin and make it take off; the faster these spin, the faster it moves. A quad copter consists of four propellers. A camera is an optional part for many quad copters that are designed just for fun. However, if your copter comes with a camera, you should be very careful in its handling because a lot of collision and failed landing attempts might break the camera lens and render it useless. There are four controls that allow a person to maneuver a quad copter in air. There are known as roll, pitch, yaw and throttle. Roll and pitch make the machine move left or right and forwards or backwards respectively. As it is clear from the name, roll makes the quad copter roll. Yaw, on the other hand, means rotating the machine left or right. Throttle is used to adjust the altitude of the vehicle in air. You can move it either backwards or forwards. The remote controller comes with a few buttons that can be pressed to adjust flight modes. Basically there are two flight modes available with any quad copter: manual and auto. In manual mode, when you tilt the copter using the roll control and then let go of the stick, the copter will not return to its initial position. Instead, it will stay tilted to the angle where you left the stick. On the other hand, in auto flight mode it auto-levels itself back to its original stance once the sticks are centered. Make sure you practice and experiment with your copter to learn all the controls separately before moving on to the next section. If you’re not familiar with the controls, you will never be able to fly a quad copter in peace. It will either move too fast or go upwards and hit the ceiling http://www.droneaddicts.net ……